2020 wholesale price Trailer Axle Bearings - How to lubrication and maintenance for trailer axle – MBP

Lubrication and maintenance of axle, please find the details showing in the below table. Note:1. If the vehicle runs under the bad conditions, the frequency of lubrication and maintenance should be increased. 2. It should be used the NO.2 Lithium base grease with the suitable temperature from -30℃ to 180℃ . MBPAP special grease package or (Retinax) LX2 grease is recommended, it’s used 1.5kgs per axle each time.

Lubrication of Axle
Note: When replace or replenish lubricant, the grease nipple of lubricating coupler and the surrounding area must be kept clean.
Cam bush/ Bearing: For the lubrication of Cam bush: Add grease every three months; Fill in grease until new grease is overflowed around the nipple.

Slack adjuster: For the lubrication of Slack adjuster, add grease every three month; Fill in grease until new grease is overflowed around the nipple.

Replacing grease for wheel hub bearing: Each time when replace the brake lining, or at least once a year, or after the vehicle road mileage reaches 150,000kms, remove each part from axle in order, thoroughly clean the bearing and sealing and sealing parts (with diesel oil), check the wearing condition, if any part fails, replace it immediately. Clean the inside of the wheel hub, and then add grease. Apply 3~5mm thickness grease on the surface of the wheel hub cavity. Apply 6-10mm thick grease on the rolling surface of the outer race of bearing. The clearance of the rollers of the rollers of the inner race of bearing should be filled with grease. Note: We suggest that whenever remove the wheel hub bearing, the hub sealing ring should be replaced by a new one, so as to obtain safe sealing performance.

FAQ

Q1. What is your terms of packing?
A: Generally, goods are sealed in ploy bags and packed in cartons and pallet or wood cases.

Q2. What is your terms of payment?
A: T/T (deposit + balance before delivery). We’ll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample for free charge if we have ready parts in stock, but the customers have to pay the courier cost.

Q7. How do you make our business long-term and good relationship?
A: We provide our clients with one-stop service, from specific component to final assembled products, solving various problem for different clients all over the world.